SI Text to speech Development Utility

This Utility will read an 'SI Text to Speech' prepared file and Speak its contents using different character voices.
Voice characteristics for the active text input file, can be altered by loading a 'Reader_Settings.txt' file.
Different voices can be sampled by selecting the 'Load a voice for testing' button.

Production Sequence:

  1. Create text content and insert reader voices where required.
  2. Save file as text format only.
  3. Open file for processing.
  4. Program will convert input file into an Array for speech processing.
  5. Activate 'Start Reading' button to start speech feedback of text content.
  6. Use 'Pause', 'Resume' and 'Reset' buttons as required
  7. Optional: Loaded a Reader Settings file, then import settings for all readers.
    See last two buttons on this display,






Voice Tester
Reader Name:
Volume:
Pitch:
Speaking Rate:


To load a 'Reader_Settings.txt' file, activate the button below and then choose your 'Reader Settings' file. Then import file using the "Import Settings File" button below.